LYNC EV Expert 100K+ Seats – Immediate hire – Houston preferred


Microsoft Unified Communications Architect



General Qualifications
A seasoned and strategic thought leader in large scale multi-vendor Unified Communications (UC) solutions.  Require full life cycle architecture, design and deployment expertise.
Role Overview

  • Engage in key engagements and lead teams in the delivery of AT&T Consulting UC  service portfolio
  • Ability to manage and exceed client expectations for delivery including facilitated meetings, whiteboard sessions, presentations, deliverables and weekly communications with client and engagement managers on status and health of the projects.  Strong business acumen and strategic customer interaction, including workshops and Strategy and Roadmap deliverables is key.
  • Deliver and lead strategy, readiness and other assessments, architecture and complex multi-vendor integration services.
  • Support Unified Communications Practice initiatives as a collaborative team.  Foster the development of standardized templates and Knowledge Management artifacts to improve field self-sufficiency.

Education and Certifications

  • Hands-on experience in UC for large, complex, and multi-vendor environments
  • 15+ years industry experience and 5 years experience in Microsoft Technologies Consulting (Active Directory, Exchange & Lync)
  • Strategic IT Consulting experience
  • Strong documentation skills
  • Bachelors Degree or Equivalent
  • Industry certifications applicable to UC
  • Must have a strong Microsoft UC Voice Specialization
  • Microsoft Certified Master and/or Microsoft Certified Architect (desired)

Business and Technical Skills

  • Microsoft Lync 2010/2013 architecture, design and deployment expertise
  • Participated in past Microsoft programs and training including Voice Partner Program, TAP, Lync Ignites, and other Microsoft Programs
  • Lync 2010/2013 Architecture, Design and Integration experience
    • Multi-vendor integration with:
      • TDM to IP based voice solutions, including Cisco, Avaya, Siemens
      • Conferencing solutions such as Cisco, LifeSize, Polycom, and SMART Technologies
    • Voice and messaging integration with Microsoft Lync premise, Lync Online and Hosted/Managed Services
    • Unified Messaging experience with Avaya, Cisco and Microsoft solutions
    • Deployment experience with media gateway including ACME Packet, AudioCodes and Sonus
    • SIP Trunking
    • Customer use case scenarios
    • Data center network re-engineering
    • Internet access engineering
    • WAN acceleration and content distribution
    • QoS, Multicast, IP traffic engineering (desired)
  • Outstanding written and verbal communications skills with experience in VP and CxO level interaction and facilitation of diverse groups and stakeholders.
  • Distinguished interpersonal skills and responsiveness supporting customers
  • Ability and wiliness to assist sales and field management in expanding and development of new business opportunities


Infrastructure QA Engineer – Contract to hire – San Francisco

sqs logo


Contract to hire opportunity in San Francisco – Infrastructure QA


  • Knowledge of VMware components
  • Knowledge of infrastructure components – servers, storage, ETL, network (physical and virtual)
  • Knowledge of infrastructure services – i.e Email, FTP, replication, backup, security
  • Strong understanding of non-functional factors such as performance, failover, reliability, availability and the
    ability to troubleshoot, setup and analyze various performance metrics.
  • Experience in network/application monitoring tools
  • Basic knowledge about database setup
  • Basic knowledge about load balancers
  • Knowledge of standard QA methodology and Communication skills
  • Knowledge of Service, Development and Test management tools, i.e. ServiceNow, JIRA, QC


The successful candidate will be responsible for the following:

  • Gathering and analyzing requirements to identify test requirements and the impact of a change from a testing perspective, including time, cost and risk;
  • Structuring a test strategy, creating project documentation, ensuring completion of QA identified activities, creating test plans and test cases for system testing, executing test cases, documenting problem reports for identified problems, performing regression testing, maintaining test logs and producing test metrics based on test results;
  • Ensuring that the execution of QA processes and testing strategies lead to the deployment of quality applications and products to FHLB users and customers.
  • Analyzing project or requirement documents
  • Reviewing all relevant project documentation and provide feedback as required.
  • Contributing to the planning, executing and reporting for the program testing activities.
  • Identifying and recommending changes to enhance effectiveness of Infrastructure set-up and design
  • Configuring hardware for the purpose of troubleshooting when investigating issues or problems specific to each project.
  • Developing and maintaining scripts and other assets that are used to support testing
  • Researching, evaluating and recommending tools and services that support or improve testing
  • Collaborating with infrastructure and application support staff in resolving defects discovered during testing
  • Liaising with infrastructure and application support teams and user acceptance team on testing activities

Security Test Automation – Westport CT – Contract

sqs logo


Long term contract in large security testing environment. Location is in Westport, CT.  SQS.COM



Job Description:

This resource is expected to work on the following areas :

  • security testing (OWASP tooling integration)
  • configuration & deployment testing and
  • performance testing

Pen test – threat modeling/review – Contract – San Francisco

sqs logo


Description of Services: SQS will perform threat modeling and security architecture reviews. The tasks will be based upon clients methodologies and requirements in order to conduct said reviews.


Threat Modelling

Threat modelling is a structured approach for analyzing the security of an application and enables the identification and quantification of security risks associated with applications or solutions. Threat modelling is typically performed early within the SDLC with its purpose being to identify threats and potential vulnerabilities within an application through the review of application design and specification documentation to identify controls for inclusion as security requirements in the development of the application.

Our approach to Threat Modelling is modularized and iterative which enables it to be used within Waterfall and Agile development approaches. This is to allow for elements of the Threat Modelling process to be performed as the supporting information for the application becomes available.

Our standard Threat Modelling Process contains the following steps:

• Understand and Modelling the Application

? Determine the Security Objectives of the Information/Application

? Identify the Information Data Flows

? Identify the User Roles

? Identify the Trust Boundaries

? Identify Entry and Exit Points

? Identify Authentication and Authorization Decision Points

? Identify Threats

• Develop Security User Stories or Abuse Cases

? Use STRIDE or DREAD as appropriate to rank threats

? Identify Potential Controls

? Develop risk mitigation strategy


Each of the above steps are documented as they are carried out and the resulting document is the threat model for the application which can be used to support design decisions

Security Architecture and Design Review

A Security Architecture and Design Review (SADR) is a structured method for reviewing the security of a system architecture at multiple levels and provide practical remediation actions to ensure maximum system security. This is performed throughout the design and implementation of a system comprised of multiple computer systems interconnected via a network.

SQS performs SADR’s to ensure that the underlying infrastructure of specific systems are secure. This includes three levels of analysis each intended to address security from the logical almost ethereal level all the way down to the hardware level.

Security Requirements Assessment

A Security Requirements Assessment is performed to ensure the system adheres to the security requirements put forth in the early stages of system development. It is intended to ensure there are no glaring security gaps in the design of the system. To perform a Security Requirements Assessment, SQS will require information such as architecture diagrams and documentation describing the intended workflow of a system, as well as the roles of its users. The following are the three key phases that will be conducted during the Security Requirements Assessment.

Security Requirements and Design Documentation

SQS will require any and all documentation pertaining to the requirements and design of the Page 3 of7


system. This includes, but is not limited to:

• Use case documentation

• Technical specifications

• Developer notes

• Administration and user manuals

• Deployment and maintenance manuals

• Network diagrams

• Existing Data Flow Diagrams

• System design diagrams

• Interconnections within the system

• Connections with external systems and networks

• Data storage mechanisms


Interview stakeholders and developers

In order to cover the gap in the available information and put the existing documentation in context, SQS will interview all of the project stake holders as well as available project managers and a small sampling of developers. All questions are derived from the existing information and should be answered honestly to the best of the interviewed ability. Contradictions and inconsistencies will only lengthen the process and might require re-interviewing. The estimated timeframe for this phase is dependent upon the number of personnel required to be interviewed. Ideally this step only requires a couple of days to achieve.


SQS security architects will collate, normalize and analyze the compiled information.

Infrastructure Configuration Review

An Infrastructure Configuration Review is performed in order to maximize the security of the physical system. This process utilizes the results of the Security Requirements Assessment to guide SQS security architects in the review of physical configurations of the target system(s).

System documentation and network diagrams

SQS security architects will require any and all documentation pertaining to the hardware and software used to make up the physical system. This includes, but is not limited to:

? Administration and user manuals

? Network diagrams

? Interconnections within the system

? Connections with external systems and networks


Interview stakeholders and administrators

In order to cover the gap in the available information and put the existing documentation in context, SQS will interview all of the network stake holders as well as available system administrators. All questions are derived from the existing information and should be answered honestly to the best of the interviewed ability. Contradictions and inconsistencies will only lengthen the process and might require re-interviewing.

Individual system configurations

In order to provide a detailed and in depth review of not only the entire system but of the individual components of the system, detailed configuration descriptions or actual configuration files are required for every piece of hardware and software used in the system. Each of these configurations will be reviewed in detail against the existing security requirements, industry Page 4 of 7


standards and best practices.


SQS security architects will analyze the documentation and configuration files provided. Each of the configurations will be reviewed in detail against the existing security requirements, industry standards and best practices. SQS uses various configuration guides, checklists and standards published by NIST, SANS and other reputable security organizations to perform the review.

Infrastructure Penetration Test

This is the last step in the SADR and is intended to leverage the customer network in certain real life scenarios based on the information gathered in the previous steps. This provides additional evidence for a customer that the system(s) can withstand an attack from both internal and external adversaries.


At this point in the SADR a wealth of information has been gathered on the target system(s). As Infrastructure Penetration Tests are frequently performed on live deployments, a scope will be defined. The scope identifies the systems that are to be tested as well as limits on types of tests to be performed. If applicable, SQS will review architecture diagram, placement of servers, network segregation, and VLAN usage, etc.

The exact scope of a penetration test is agreed during the planning and initiation phase but in general the aims of each penetration test will be to assess the security of internal and external infrastructure and to provide assurance over the security configuration of the in-scope systems. In some cases, the penetration phase will provide access to previously inaccessible hosts or networks, and in these cases, the test team will move on to test the newly-visible infrastructure, beginning again with the network mapping phase. In this sense, the sequence of test execution can become recursive. At all times, the test team will take care to avoid infrastructure that is out of scope, and will not exploit vulnerabilities that may have adverse effects on live services without prior consultation with the designated technical contact.

1. Public Information Discovery

2. Public-Facing Address Confirmation

3. Network Mapping Phase

4. Vulnerability Mapping Phase

5. Penetration Phase


SQS will then attempt to gain access to CLIENT’s network by leveraging the vulnerabilities and weaknesses discovered to a point where we are in a position to compromise information or the integrity of your network. SQS may use vulnerability scanning tools to scan the target network and systems with all its varying configurations of hardware and software, but while these scanners can perform the bulk of the scanning, manual verification is necessary to eliminate false positives, expand the scope, and to discover the data flow in and out of the network. Manual testing refers to a person or persons at the computer using creativity, experience, and ingenuity to test the target network in view of penetrating the network using SQS’ own techniques.

Manual verification is carried out using combinations of the tools listed previously, in addition to proprietary tools and simple clients such as those for Terminal Services, HTTP servers, MS-SQL, CIFS file shares, NFS exports, NIS, LDAP servers. Network configuration issues are not normally exploited as this can lead to network failure. However, should exploitation be desired, this is accomplished using tools such as Zebra and hping.


Exploitation of common host-based vulnerabilities is facilitated by the use of frameworks such as metasploit and canvas, whilst on-host data gathering is achieved by tools such as cachedump, lsadump and pwdump in conjunction with proprietary tools that are essentially batch files or shell scripts wrapping system tools such as the Windows net command and standard UNIX shell utilities. These techniques are considered aggressive, and will not be used on hosts providing live services without the permission of the technical contact.


SQS will provide the following deliverables to CLIENT:

? Weekly status updates

? Preliminary report

? Final report


HP ALM Support – Oshkosh WI – Contract

sqs logo


HP ALM Support –  Contract opportunity in Oshkosh Wi.




  • Extensive experience in HP ALM – able to assist other teams in using ALM and applying best practices to test case writing and defect management
  • ALM Admin experience
  • Extensive knowledge test case writing frameworks and best practices
  • Strong test process experience
  • Strong soft skills – able to interact with other teams, lead conversations, teach, and mentor others on testing
  • Strong test coordination and facilitation stills
  • Effective communicator at varying organizational levels
  • Able to execute and/or coordinate the execution of manual test cases as needed
  • Able to produce meaningful testing metrics and status reports
  • US Citizen or Green Card holder


National LYNC/Skype/Exchange UC/Network Engineer Lead- Lexington KY





Unified Communications Engineer

Role type Senior Systems Engineer

Department Group IT – IT Operations

Reports to Global Head of IT Operations

Direct Reports All other USA IT Technical Resources


Role Purpose



  • Responsible for the design, evolution, build, support and configuration of the USA Core Infrastructure, with special focus on Microsoft Unified Communications products: Lync/Skype and Exchange
  • Influencing new and evolving design, architecture, standards, and methods for operating of the UC products
  • Managing the availability, performance, scalability and efficiency of the core by engineering reliability and work management features into the systems.
  • Provide global support within US operating hours
  • Maintenance and support in accordance with agreed SLA’s
  • Failure analysis, troubleshooting and documentation



Management None

General Specific day-to-day duties:

  • Resolution of escalated support tickets
  • Troubleshooting of UC issues
  • Maintenance and configuration of USA IT Infrastructure
  • Responsible for First & Second Level support of User Issues
  • Responsible for assigned IT Projects
  • Liaising with internal business groups
  • Planning and working flexibly to a deadline
  • Writing user manuals & documentation
  • Providing training to users of a new or updated system
  • Keeping up to date with technical and industry developments


Technical Specific technical related skills:


  • Responsible for Second Level support of Lync
  • Responsible for Second Level support of Exchange
  • Responsible for the smoother running of USA IT Infrastructure
  • Responsible for assigned IT Projects
  • Responsible for implementing Federations with third parties
  • Monitoring and maintenance of UC platforms and systems


Budget No budget responsibilities

Person Specification


Qualifications Qualifications essential for the role:

Computer Science Degree or other IT qualification Essential

Skills & Experience Level and/or knowledge that you wish the candidate to possess:

          • Several years of experience and possible certifications in Unified Communications environment, focus on Microsoft Lync and Exchange Essential
          • Excellent knowledge of PSTN, ISDN, SIP, network connections and data center environments Essential
          • Good knowledge of network infrastructure, PC workstations and Microsoft Windows OS Essential
          • Knowledge of TCPIP stack of Windows and TCP-IP in general Essential
          • Network analysis tools, such as Wireshark Essential
          • Strong analytical and organizational skills as well as good communication skills. Essential
          • Be prepared to travel for Business Essential
          • Strong Collaboration with an international team Essential
          • Full professional proficiency in English (ILR Scale) Essential
          • Limited working proficiency in German Desirable
          • Microsoft Certifications: MSCE communication and / or Messaging Desirable

Key Attributes

  • Communication
  • Decision Making And Judgement
  • Respectful
  • Knowledgeable
  • Experience
  • Proactive & Involved
  • Patient & Tolerant
  • Team worker

New England – PCI active QSA – Full time – We ROC

NewEnglandflagAT&T Security Solutions is a division of AT&T (a Fortune Global Top 10 company). AT&T is looking for

an information security practitioner with technical experience for the position of a Senior Consultant

located in the western US to be a part of a dynamic team of experienced security professionals with

varied experiences. Candidate must be skilled in Secure Infrastructure Services such as network

penetration testing, device configuration review, and secure architecture reviews. AT&T Security

Consulting clients range from some of the largest companies in the world to small businesses requiring

security consulting expertise.

Job Duties:

Key functions of this role will be to work on security and privacy consulting engagements for our

customers. Successful candidates will have demonstrated experience in security consulting and will

have an understanding of the business-technology interface; they will be able to understand business

environments/issues and have the ability to link them to technology at a high level. Experience with

network penetration testing is required. Technical security knowledge and experience with compliance

assessments such as PCI-DSS and ISO 27002 will be given preference.


• Bachelors degree in Computer Science or related fields, Masters Degree preferred

• A minimum of four years of Information Security consulting experience required

• Very good understanding of security operation & management in a large customer environment

• Must be a flexible team player, hard-working, and posses excellent communication and customer-
facing skills

• Must be self-directed, able to manage solo projects or participate as part of a larger team

• Strong report writing skills and ability to explain complex security issues to customers in a formal

presentation format required

• Creativity in finding cost-effective remediation solutions acceptable to our clients

• Must be able to interact confidently with all levels of technical and management client teams

• One Security certification such as CISSP, CISA, CISM, PCI QSA, CEH, SANS GSEC, etc., is required and

willingness to pursue further certification preferred.

• Ability to travel, mostly within region, must possess drivers’ license

Technical Skills

• Knowledge and experience with risk and compliance projects dealing with a variety of regulatory

and voluntary compliance standards such as: PCI-DSS, ISO 27000 series, federal and state security

and privacy regulations, HIPAA/HITECH, HiTrust, GLBA, SOX 404,etc. preferred

• Strong technical problem / resolution skills required

• Knowledge and experience with technical network and host-based security required.

• Mid to advanced level infrastructure or security design capabilities for environments that include 10

to 20 security devices, processes or applications.

• Mid to advanced level systems administration (UNIX/Linux, Windows, or mainframe)

• Knowledge with different application architectures and platforms, their development challenges,

their control configurations, and their inherent security strengths and weaknesses (e.g., ColdFusion,

J2EE, .Net) preferred

• Mid to advanced level network administration (firewalls, IDS/IPS, network architecture)

• Mid to advanced level knowledge of Penetration testing (network, system and application) required

• Mid to advanced level knowledge of one or more of the following preferred:

o Vulnerability scanning

o Application development

o Policy development

o Forensics

o Security event monitoring

• Vendor certification or demonstrable in-depth technical expertise with at least three major security


o Examples Only: Symantec, McAfee, VeriSign, Juniper, Checkpoint, Cisco, Arcsite, Tripwire,

o Demonstrable experience includes being able to gather customer requirements, design a


solution, specify a build of materials, implement, tune/optimize, maintain or troubleshoot at

an architecture component level for an existing solution

Additional Requirements

• Knowledge and experience with risk and compliance assessments

• Familiar with retail information security challenges a plus

• Bi-lingual candidates a plus